Tecno Spark Go 2024 (BG6) Corrupt Error Fix With AMT Tool
What You Need:
- Tecno Spark Go 2024 (BG6) with Corrupt Error
- AMT Tool (Android Multi-Tool)
- USB Cable
- USB Drivers for Tecno Device
- A Windows PC
Steps to Flash Firmware on Tecno Spark Go 2024 (BG6):
1. Download Required Files
- Download the AMT Tool from a trusted source.
- Download the correct official firmware for your device model.
2. Install Necessary Drivers
- Install the USB drivers for your Tecno device on your PC.
- Install ADB and Fastboot drivers on your PC to ensure smooth communication.
3. Backup Your Data
- Flashing the firmware will erase your data. Make sure to back up important data.
4. Ensure Sufficient Battery
- Charge your phone to at least 50% to avoid power issues during flashing.
Flashing the Firmware:
1. Extract the Firmware
- Extract the downloaded firmware to a folder on your PC.
2. Install and Launch AMT Tool
- Install and launch the AMT Tool on your PC.
3. Connect Your Device
- Power off your device.
- Enter Fastboot Mode or Download Mode by pressing the Volume Up + Power buttons.
- Connect the phone to your PC using a USB cable.
4. Select Firmware and Start Flashing
- In the AMT Tool, select the downloaded firmware file (usually a .pac or .bin file).
- Choose the correct device model and ensure proper flashing options are selected.
- Click Start to begin the flashing process.
5. Wait for the Flashing Process
- Wait for the flashing process to complete. The tool will indicate when it's finished.
6. Reboot Your Device
- Once flashing is complete, the device should reboot automatically. If not, press the Power button to reboot manually.
Troubleshooting Tips:
- If the tool doesn’t detect your phone, ensure USB debugging is enabled and correct drivers are installed.
- Ensure you're using the correct firmware version for your device model.
Subscribe Our Newsletter
0 Comment
Post a Comment