Tecno Kl5 Anti-Crack Firmware Just Flashing

Prerequisites:

• Download Firmware: Get the correct firmware from official sources.
• Install SP Flash Tool: Download and extract the SP Flash Tool.
• Install Drivers: Ensure your device drivers are installed.
• Backup Data: Backup your data before proceeding.
• Charge Phone: Ensure 50%+ battery before flashing.

Steps:

1. Enable Developer Options

• Go to Settings > About Phone and tap Build Number 7 times.
• Enable USB Debugging in Developer Options.

2. Connect Phone to PC

• Use a USB cable to connect your phone to the computer.

3. Open SP Flash Tool

• Launch SP Flash Tool and click Scatter-loading to select the scatter file.
• Ensure all required files are loaded.

4. Start Flashing

• Click Download in SP Flash Tool.
• Wait for the process to complete.

5. Reboot Phone

• Once flashing is complete, disconnect the phone and reboot it.
• Your phone should now boot with the new firmware.

Troubleshooting:

• If the phone isn't detected, reinstall the USB drivers or try a different USB cable.
• If there's a bootloop, clear the cache in recovery mode.

Note: Be cautious during the flashing process to avoid bricking your device!

Download Firmware

✖

Share this Posts

• Share To Facebook Share To Twitter Share To Pinterest Share To Whatsapp Share To Linkedin Share To Tumblr Share To Telegram Share To Reddit Share To Gmail

Subscribe Our Newsletter