OnePlus 9 Pro 5G Dead Boot Repair via UMT Tool
Follow this step-by-step guide to repair your OnePlus 9 Pro 5G (LE2127) Global Firmware using UMT Tool.
Tools Needed:
- UMT Tool (with the correct version installed)
- USB Cable
- Official OnePlus 9 Pro 5G Firmware
- PC or Laptop running Windows
- OnePlus 9 Pro 5G with Umt Flash
Steps to Repair Dead Boot Using UMT Tool:
1. Install UMT Tool
- Download and install the UMT Tool on your PC. Ensure all necessary drivers are installed (e.g., Qualcomm drivers).
2. Download OnePlus 9 Pro 5G Firmware
- Download the official firmware for OnePlus 9 Pro 5G from trusted sources.
- Ensure you download the correct firmware to avoid compatibility issues.
3. Connect OnePlus 9 Pro 5G to PC
- Turn off your OnePlus 9 Pro 5G.
- Press and hold the Volume Up + Power buttons to boot into **Fastboot Mode**.
- Connect the device to the PC via USB cable.
4. Launch UMT Tool
- Open UMT Tool on your computer. Ensure the tool detects the device in **Fastboot Mode**.
5. Select the Repair Option
- In UMT, choose the **Global Firmware** option.
- Load the correct OnePlus 9 Pro 5G firmware and confirm.
6. Start the Repair Process
- Click the **Start** or **Repair** button in UMT to begin the repair process.
- Wait for the flashing process to complete. Do not disconnect the phone during this time.
7. Reboot the Device
- Once the repair is completed, the device should automatically reboot.
- If it doesn’t reboot, manually power it on by holding the Power Button.
8. Check the Device
- Check if the device successfully Flash.
- If the issue persists, consider seeking professional repair services.
Troubleshooting:
- If UMT Tool doesn’t detect the device, make sure the necessary drivers are installed properly.
- If flashing fails, ensure that the firmware version matches the OnePlus 9 Pro 5G model.
- If the device still doesn’t boot, it could be a hardware issue. Consult a professional technician.
Subscribe Our Newsletter
0 Comment
Post a Comment